Well integrity management solution
Well integrity has always been a concern in the E&P industry but until the Macondo incident it did not attract the same level of attention as asset integrity for process units. Since then, well integrity has topped the worry-list of management, and with good reason. Well integrity failure can have a major adverse impact on Asset revenue, cashflow and profitability, as well as liabilities from safety and environmental damage, Withdrawal of a company’s “license to operate” Shareholder value; partly due to reputational damage.
Industry research indicates that a large number of wells are affected by integrity problems. The severity and frequency of well integrity problems strongly depends on the region, the fluids handled and the age of the wells. Globally it is estimated that 38% of oil and gas wells are affected by integrity issues, varying from 45% in the Gulf of Mexico to 18% in the Norwegian Continental shelf.
Well integrity deteriorates with age and as long as wells are operated in harsher environments. This may not necessarily affect the integrity of the Well but the operator has to monitor the well’s condition very closely and act quickly if a further fault is detected.
Excessive pressure in the annulus can lead to Casing/Tubing collapse. This eventually results in poor production performance, damages to installation equipment and personnel as the case may be.
The safety of your crew, equipment, and the environment depends on well integrity. Though your well is constructed from thousands of components, a single failure or the smallest leak can lead to major safety and production problems. Tubular are the backbone of well integrity. However total well integrity goes far beyond well construction.
We assist our clients to safely and sustainably find, drill, complete and produce oil and gas fields efficiently and cost effectively. We depressurize and monitor the well casing/tubing pressure leakage test. The monitoring and pressure control process is one of the investigative measures to check and balance pressure build-up (PBU) from the tubing and casing.
MONITORING WITH GAS FLOW METER AT CLIENT’S FACILITY
It offers a better chance of elevating and sustaining Well performance and production enhancement.
Clients are able to identify Wells that are due for Well integrity checks, test, repairs, chemical treatments and other inspections required on time before an accident. The cost of an accident can be so enormous, we believe in “a stitch in time saves nine”.
Helps in the integration of data from automated systems and numerous manual sources, so that company can move from several separate databases to a single streamlined database system.